Twitter   Facebook   Linkedin   Youtube
Home > Blog > Launch Campaigns > 3800/TD1 + TA Y 3801/TD1 + TA

BLOG


Launch Campaigns


ampliada

3800/TD1 + TA Y 3801/TD1 + TA






 

Description and uses
The models 3800 y 3801 TD1 + TA, designed and manufactured by SENOR, are wall mounts to build acoustic wall lining systems. They are made of a high quality polymer (rubber) which allows to decrease vibrations and isolate sound frequencies, a galvanized steel DX51D + Z275 MAC bracket and a screw (7 cm) with a nylon wall plug used to hold wall mount to the wall lining system.
The 3800 TD1 + TA bracket is 1,5 mm thickness. Its use is to build wall lining system with more than 10 cm air chamber.
The 3801 TD1 + TA bracket is 0,8 mm thickness. Its use is to build wall lining system with less than 10 cm air chamber. When fixed to the stud, the rest of the bracket can be folded with your owns hands (see images on the back).
Both are used to isolate wall lining system with self-supporting metal structure (channels and studs) from original wall. They are placed in vertical studs.
References
SE-3800/TD1 + TA: 1,5 mm bracket SE-3801/TD1+TA: 0,8 mm bracket This product is sold in 100 and 24 units boxes and 6 units bags.
Main benefits
They avoid vibration transmission. Polymers works both compression and elongation, that means, two directions.
Provides thermal break avoiding heat and cold transmission.
Screw and washer combination ensure the fastening in the event of fire.
Possibility to build wall lining systems with air chambers with several thicknesses.
Easy installation.

 

Description and uses

The models 3800 y 3801 TD1 + TA, designed and manufactured by SENOR, are wall mounts to build acoustic wall lining systems. They are made of a high quality polymer (rubber) which allows to decrease vibrations and isolate sound frequencies, a galvanized steel DX51D + Z275 MAC bracket and a screw (7 cm) with a nylon wall plug used to hold wall mount to the wall lining system.

The 3800 TD1 + TA bracket is 1,5 mm thickness. Its use is to build wall lining system with more than 10 cm air chamber.

The 3801 TD1 + TA bracket is 0,8 mm thickness. Its use is to build wall lining system with less than 10 cm air chamber. When fixed to the stud, the rest of the bracket can be folded with your owns hands (see images on the back).

Both are used to isolate wall lining system with self-supporting metal structure (channels and studs) from original wall. They are placed in vertical studs.

 

 

 

 

 

References

SE-3800/TD1 + TA: 1,5 mm bracket

SE-3801/TD1+TA: 0,8 mm bracket

This product is sold in 100 and 24 units boxes and 6 units bags.


Main benefits

- They avoid vibration transmission. Polymers works both compression and elongation, that means, two directions.

- Provides thermal break avoiding heat and cold transmission.

- Screw and washer combination ensure the fastening in the event of fire.

- Possibility to build wall lining systems with air chambers with several thicknesses.

- Easy installation.


Suggestion

In order to get the best acoustic results, it is recommended to fix the channels with TAV 500/11 R and TAV 500/11 A, mounts, avoiding to make the common mistake of fix channels with screws, which gets worse the wall lining system soundproofing. In addition, EPDM rubber strip should be used to obtain the best sealing.




OTHER BLOG CATEGORIES



CONTACT


SENOR ACOUSTIC SOLUTIONS

Polígono Industrial El Garrotal
Parcela 10 - Módulos 4 y 5, CP. 14700
Palma del Rio (Córdoba) España
Apdo. Correos: 226
Tlfo: (+34) 957 32 51 06 - 07
Customer service schedule:
Monday to Friday: 7:00 a.m. to 3:00 p.m.


SOCIAL MEDIA





Powered by: www.comunica-web.com