Twitter   Facebook   Linkedin   Youtube
Home > Blog

BLOG


Introduction to our ACOUSTIC MOUNTS



28/07/2022


Definition: Anti vibration mounts absorb and dampen vibrations. Either reducing the vibration transmission (especially structure borne sound)  in building structures such as ceilings, linings, partitions and floors or attenauting vibrations produced by machinery, drastically reducing the vibration and noise output of an equipment.   Categories: SENOR, after more than 25 years of experience manufacturing mounts and after having carried out countless acoustic laboratory tests, divides them into two categories: - Polymeric mounts (rubber): to attenuate sounds in medium/high frequencies. - Hybrid mounts (rubber and spring): to attenuate sounds in low/medium/high frequencies. The rubber provides vibration isolation in the medium/high frequency range meanwhile the spring (steel spiral) provides a high degree of isolation in the low/medium frequency range.   Features: Mounts should be able to work freely in elongation ...

[View more]



19/05/2022




[View more]

Installation of direct wall lining system with FTD SENOR products



09/05/2022


Nowadays, many people live everyday with outside noises that come into their homes, such as neighbours’ noise, traffic, worksites, etc.  To get the best rest and forget noises, a soundproofing treatment is essential. Building a direct wall lining system is one of the options that can resolve the problem of annoying noises. With the solution here mentioned you won’t need too much space and it will attenuate vibration and airborne and impact noise. Usually, this wall lining system is used in flats, small houses, hotels, between others.   EXAMPLE AND ADVICE  -        Wall with 2,5 m height x 4 m length = 10 m2 -        Distance between steel channels: 60 cm -        Steel channels installed vertically (it could be in horizontal, too). -        It is recommended plasteri...

[View more]

Sick and tired of noisy neighbours?



18/04/2022


  Your house should be your sanctuary, a place of rest and peace. Unfortunately, many of us suffer from noise disturbance inside our homes. Footsteps, music, loud conversations, dragging furniture, pets...these are just some of the noisesthat invade your room. Perhaps it is time to carry out acoustic insulation so that silence reigns again in your house. For this we must carry out an acoustic treatment on the walls and ceiling and even on the floor. Gypsum board systems are the most effective and used in soundproofing. The first point to consider is that noise is differentiated into two types.  Noise transmitted via air is called airborne noise while the noise that is transmitted through solid objects and surfaces is called structure-borne or impact noise. So  we must create a system that attenuates both types of noise to be really effective. That is the reason why acoustic mounts (anti-vibration systems) are...

[View more]

EPDM Acoustic rubber strip (SE-BEC)



01/02/2022


Description and uses   Our acoustic bands are self-adhesive membranes made of EPDM CR-130 Microcellular (ethylene propylene diene rubber), an elastomer with excelent acoustic insulation properties. It is also a material with good performance against atmospheric agents, acids or chemical products, and with very low thermal conductivity.   It is used in the installation of construction systems with laminated plasterboard to avoid contamination by vibro-mechanical energy to the rest of the building.   It prevents the transmission of structural noise (impact noise) that may happen between the different rooms of the building and also improves airborne noise insulation.   Installation   In systems with laminated plasterboard, the EPDM band is placed on the perimeter of linings, ceilings or acoustic partitions, that is, in all the edges, to seal hermetically the system.   In order to decouple rigid con...

[View more]



16/12/2021




[View more]


 1  2  .  .  5      27 Registros


BLOG CATEGORIES



CONTACT


SENOR ACOUSTIC SOLUTIONS

Polígono Industrial El Garrotal
Parcela 10 - Módulos 4 y 5, CP. 14700
Palma del Rio (Córdoba) España
Apdo. Correos: 226
Tlfo: (+34) 957 32 51 06 - 07
Customer service schedule:
Monday to Friday: 7:00 a.m. to 3:00 p.m.


SOCIAL MEDIA





Powered by: www.comunica-web.com