4360/47 DS - Acoustic Ceiling

They are third generation acoustic hangers made of a renewed polymer, providing greater performance in the vibratory field.

Introduction

It is a different acoustic hanger in constant evolution for the installation of acoustic false ceilings, using galvanized steel profiles type TC47, F-530, MAESTRA 47/17 or similar.

We are totally dedicated to safety. For this reason, the 4360/47 DS model incorporates the most advanced locking device of the moment. We are the only ones who can manufacture it.

Main features

It stands out by its direct fastening to 45/47 mm ceiling profiles (type TC47 PLADUR, F-530 PLACO and MAESTRA 4717 KNAUF or similar). This type of acoustic hanger is designed to eradicate and attenuate the transmission of vibrations produced by equipment with repetitive and rotating blows above 20 Hz.

Dynamic load capacity 

In the acoustic field there is a very wide diversity of constructive solutions, where the distribution of the load will depend on different variables, such as: mass, distance between the inter-axes of the ceiling profiles, arrangement of the hangers on the slab, etc. The 4360/47 DS model is available in 2 colours in order to differentiate the load per unit (kg): Green and Blue. 

The Green colour in the 4360/47V model indicates standard load capacity: 8 kg up to 30 kg of maximum load. 

The Blue colour in the 4360/47A model indicates a higher load capacity: 27 kg up to 50 kg of maximum load. 

Resonance frequency: 7-15 Hz.  

In this way, we can choose the most effective hanger depending on the system.

Laboratory tests carried out in accordance with the standard UNE-EN ISO 10846-1:2009. (UNE: Spanish Association for Standardization). 

For further information, please download Data Sheet document.

Note: This product is available with a single safety device (DS) or with a double safety device (DS-2).