4360/60 DS - Acoustic Ceiling 

It is an acoustic ceiling hanger made of a renewed polymer which provides a greater performance in the vibratory field.

Introduction 

It is a different acoustic hanger evolved for the installation of acoustic false ceilings, using galvanized steel profiles type TC60, RIGI 60, MAESTRA 47/17 or similar.

We are totally dedicated to safety. For this reason, the 4360/60 model incorporates the most advanced locking device of the moment (DS). We are the only ones who can manufacture it.

Main features 

It stands out by its direct fastening to 60 mm ceiling profiles (type TC-60 PLADUR, RIGI 60 PLACO and MAESTRA 6027 KNAUF or similar). This type of acoustic hanger is designed to eradicate and attenuate the transmission of vibrations produced by equipment with repetitive and rotating blows above 20 Hz.

Dynamic load capacity 

In the acoustic field there is a very wide diversity of constructive solutions, where the distribution of the load will depend on different variables, such as: mass, distance between the inter-axes of the ceiling profiles, arrangement of the dampers on the slab, etc. The 4360/60 DS model is available in 2 colours in order to differentiate the load per unit (kg): Green and Blue. 

The Green colour in the 4360/60V model indicates a standard load capacity: 8 kg up to 30 kg of maximum load. 

The Blue colour in the 4360/60 A model indicates a higher load capacity: 27 kg up to 50 kg of maximum load. 

Resonance frequency: 7-15 Hz. 

In this way, the proper hanger can be chosen depending on the weight system.

Laboratory tests carried out according to standard UNE-EN ISO 10846-1:2009.

(UNE: Spanish Association for Standardization). 

For further information, please download Data Sheet document.

Note: This product is available with a single safety device (DS) or with a double safety device (DS-2).